Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Iowa

Pool Deck Cleaning for Concrete in Iowa

Pressure wash with a surface cleaner for concrete. Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone. Typical cost $200-$500.

Pool Deck Cleaning for Concrete is one of the jobs we do most often in Iowa. Typical jobs cost $200-$500, and you approve the price before we begin. For concrete, that means pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Cleaning concrete safely

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Signs you need pool deck cleaning for concrete

  • Slippery spots near the water
  • Black or green growth at the edges and in joints
  • Rust or leaf stains
  • Faded or dirty coating
  • Hard-water and chlorine residue

What causes the dirt and stains

  • Constant splashing and standing water
  • Sunscreen, body oils and pool chemicals
  • Leaves and pool toys left on the deck
  • Hard water drying on the surface

What you can do yourself

  • Hose off the deck after heavy pool use
  • Remove leaves and toys before they stain
  • Keep chlorine and acid containers off the deck surface
  • Ask us before using any cleaner on a coated or stone deck

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Peeling or etching a coated 'cool deck' surface with high pressure
  • Chemicals and wash water getting into the pool
  • Pitting travertine with acid cleaners
  • Slips on wet, treated surfaces

How we handle pool deck cleaning for concrete

  1. Check the deck material and coating
  2. Protect the pool and nearby plants
  3. Pre-treat algae and stains with pool-safe methods
  4. Clean with pressure suited to the surface
  5. Rinse thoroughly away from the water

Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.

Pool Deck Cleaning for Concrete cost in Iowa

$200-$500Typical range for a typical residential pool deck
1-3 hoursTypical time on site
Once or twice a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Serving Iowa and nearby towns

In Iowa, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

We cover 164 cities and towns across Iowa. Find pool deck cleaning for concrete in your city:

Pool Deck Cleaning for Concrete: frequently asked questions

How much does pool deck cleaning for concrete cost in Iowa?

Pool Deck Cleaning for Concrete typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pool deck cleaning for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is pool deck cleaning for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pool deck cleaning for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Iowa

Sidewalk & Walkway Cleaning

Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime.

Typical $100-$250

Soft Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$800

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Parking Lot & Garage Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $500-$3,000

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Efflorescence Removal for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $200-$600

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Soft Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$800

Stucco Cleaning

Stucco and EIFS soft washing that removes green and black growth, dirt and rust stains without damaging the finish.

Typical $300-$800

Ready for a cleaner home or business?

Get a free pressure washing quote in Iowa. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote